Here is my Super Cub aileron mod. I used 2 Hitec hs-55 servos in the wing with PZ control horns and Stryker push rods cut down from the threaded side to fit. I cut a 2 liter bottle open and cut four 1/2" hinges for the 12" ailerons.
Use a sharp blade to cut out the ailerons:
Aileron cutouts (12"):
My "soda bottle" hinges – four ½" hinges on each aileron:
Looks good:
Next task – adding the servos; notice the groove in the wing to run the servo cables:
Some detail shots – I used Stryker push rods cut down from the threaded side to fit:
Super Cub Aileron Mod
Adding Ailerons
Here is my Super Cub aileron mod. I used 2 Hitec hs-55 servos in the wing with PZ control horns and Stryker push rods cut down from the threaded side to fit. I cut a 2 liter bottle open and cut four 1/2" hinges for the 12" ailerons.
Use a sharp blade to cut out the ailerons:
Aileron cutouts (12"):
My "soda bottle" hinges – four ½" hinges on each aileron:
Looks good:
Next task – adding the servos; notice the groove in the wing to run the servo cables:
Some detail shots – I used Stryker push rods cut down from the threaded side to fit: